Cardone Reman 18-4822XR Disc Brake Caliper For FORD

Buy Part Now

ShowMeTheParts has a wide selection of Cardone Reman products for a variety of years, makes, and models.

Cardone Reman 18-4822XR Disc Brake Caliper For FORD

BUYERS GUIDE

Make Model Year Engine
FORDFOCUS2000-07All

PART INFORMATION

Brand:Disc Brake Caliper by Cardone Reman For FORD | ShowMeTheParts.com
Part Number:184822xr
Part Type: Disc Brake Caliper
Comment:Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.; For a premium appearance and enhanced protection against corrosion and rust, CARDONE Color-Coated Calipers feature a weather-proof coating available in red or yellow. Each caliper is built with brand-new, premium components to guarantee exceptional braking performance and longevity. They are also tested to meet rigorous standards and packaged with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.

PARTS ATTRIBUTES

Name Value
Abutment Clips IncludedNo
Anti-Rattle Spring IncludedYes
Anti-Rattle Spring IncludedNo
Average Current DrawWhat type of fluid should I use: DOT 3, DOT 4, or DOT 5?
Average Current Draw (Ampere)Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
Bleeder Screw Cap IncludedNo
Bleeder Screw IncludedYes
Bleeder Screw Quantity1
Bleeder Thread SizeM7x1.0
Bracket IncludedYes
Caliper ColorRed
Caliper FinishPowder Coated
Caliper Slides IncludedYes
Caliper Slides IncludedNo
Caliper TypeFloating
Casting Number2386/1
Casting Number4754/6
Contains Electronic ComponentsNo
Country of OriginUnited States
Disc Brake Caliper Casting MaterialCast Iron
Does it require SDSNo
Dust Boots IncludedYes
E-WasteNo
End 2 Fitting GenderYes
End 2 Fitting GenderNo
End To End Length (Inch)Powder Coated
End To End Length (Millimeter)Cast Iron
FAA_A1Our Coated Calipers are currently available in Silver, Blue, Yellow and Red.
FAA_A2Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAA_A3As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAA_A4Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAA_A5Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAA_A6A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAA_A7A silicone grease is used on floating caliper mounting pins.
FAA_A8New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.
FAQ_Q1What colors are the Coated Calipers available in?
FAQ_Q2Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAQ_Q3What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAQ_Q4Car pulls to one side during braking. Why?
FAQ_Q5Brakes squeal all of the time. What's causing the squeal?
FAQ_Q6Could calipers be the cause of a low brake pedal?
FAQ_Q7What type of grease is used on floating caliper mounting pins?
FAQ_Q8Do all of your Calipers come with the new hardware and a mounting bracket for installation?
Flash Programming RequiredOur Coated Calipers are currently available in Silver, Blue, Yellow and Red.
Fuel Filter IncludedYes
Fuel Filter IncludedNo
Grade TypeRegular
Hardware IncludedCould calipers be the cause of a low brake pedal?
Hazardous MaterialNo
Height - Each (Inch)5.2500
Housing Height (In)As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
Housing IncludedWhat colors are the Coated Calipers available in?
Housing Width (in)Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
Inlet Fitting TypeInverted Flare
Inlet Port Quantity1
Inlet Port Size (Inch)0.394
Inlet Port Size (Millimeter)10.00366
Inlet Thread SizeM10x1.0
Input Shaft Diameter (Inch)No
Input Shaft Diameter (Millimeter)Yes
Input Shaft Spline QuantityYes
Is Item A ChemicalNo
Is Or Contains A BatteryNo
Is Or Contains A BulbNo
Is Prop Sixty Five AffectedNo
Is the item CARB affectedNo
Item Level GTIN00884548195066
Length (in)M7x1.0
Length - Each (Inch)8.0000
Life Cycle StatusAvailable to Order
Linkage Frame or BracketBrake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
Material Thickness (mm)Brakes squeal all of the time. What's causing the squeal?
Maximum Gauge Diameter (in)Yes
Minimum Gauge Diameter (in)Yes
Motor IncludedWhat type of fluid should I use: DOT 3, DOT 4, or DOT 5?
Mounting Bolt IncludedNo
Mounting Bracket IncludedYes
Mounting Hardware IncludedYes
Mounting Hole DiameterYes
Mounting Hole Diameter (Inch)0.322
Mounting Hole Diameter (Millimeter)8.17558
Mounting Hole Thread Diameter (Inch)0.322
Mounting Hole Thread Diameter (Millimeter)8.17558
Outlet Fitting Thread Size (Millimeter)Yes
Output Shaft Diameter (Inch)M7x1.0
Output Shaft Diameter (in)Powder Coated
Output Shaft Diameter (mm)Cast Iron
Package ContentsCaliper; Instruction Sheet; Bracket; Hardware Kit
Pad Wear Sensor IncludedNo
Pads IncludedNo
Piston Diameter (Inch)1.335
Piston Diameter (Millimeter)33.909
Piston MaterialSteel
Piston Quantity1
Plug and PlayInspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
Product ConditionRemanufactured
Pulley Attachment Type1
Quantity Per Application1
Resistance Ohms Full (PSI)1
Rust Resistant CoatingYes
Strainer Fitting Diameter (Millimeter)What colors are the Coated Calipers available in?
TypeA silicone grease is used on floating caliper mounting pins.
WarrantyA silicone grease is used on floating caliper mounting pins.
Weight - Each (Gross Pounds)6.3000
Width (in)No
Width - Each (Inch)6.1250
Wire Gauge MeasurementCaliper
Wire Or Terminal QuantityYes
Buy Part Now
Top