Cardone Reman 18-4088 Disc Brake Caliper

Buy Part Now

ShowMeTheParts has a wide selection of Cardone Reman products for a variety of years, makes, and models.

Cardone Reman 18-4088 Disc Brake Caliper

BUYERS GUIDE

MakeModelYearEngine
CHEVROLETC3078-75All
CHEVROLETC30 PICKUP74-71All
CHEVROLETG3078-75All
CHEVROLETG30 VAN74-71All
CHEVROLETK3078-77All
CHEVROLETP3078-75All
CHEVROLETP30 VAN74-71All
FREIGHTLINERMT3505-97All
FREIGHTLINERMT4505-98All
FREIGHTLINERMT5505-99All
GMCC3578-75All
GMCC35/C3500 PICKUP74-71All
GMCG3578-75All
GMCG35/G3500 VAN74-71All
GMCK3578-77All
GMCP3578-75All
GMCP35/P3500 VAN74-71All
INTERNATIONAL1452SC92-87All
INTERNATIONAL1652SC97-87All
INTERNATIONAL1652UPS1993All
INTERNATIONAL1652UPS91-90All
INTERNATIONAL1652UPS97-95All
INTERNATIONAL165489-82All
INTERNATIONAL172484-82All
INTERNATIONAL175489-82All
INTERNATIONAL182484-82All
INTERNATIONAL185489-82All
INTERNATIONAL195489-84All
INTERNATIONAL195589-84All
INTERNATIONAL20075-74All
INTERNATIONAL215589-82All
INTERNATIONAL300097-96All
INTERNATIONAL3000FE1997All
INTERNATIONAL3000RE97-96All
INTERNATIONAL340097-96All
INTERNATIONAL360097-92All
INTERNATIONAL370094-90All
INTERNATIONAL380097-90All
INTERNATIONAL3900FC94-91All
INTERNATIONAL460095-90All
INTERNATIONAL4600LP94-90All
INTERNATIONAL4600UH1990All
INTERNATIONAL470097-90All
INTERNATIONAL4700LP97-90All
INTERNATIONAL4700LPX97-95All
INTERNATIONAL480097-90All
INTERNATIONAL490097-90All
INTERNATIONAL710092-90All
INTERNATIONALM1400 METRO II89-87All
INTERNATIONALM1600 METRO II89-87All
INTERNATIONALS16241982All
INTERNATIONALS165489-84All
INTERNATIONALS1654LP89-88All
INTERNATIONALS172385-82All
INTERNATIONALS172484-82All
INTERNATIONALS175389-84All
INTERNATIONALS175489-82All
INTERNATIONALS18231982All
INTERNATIONALS182484-82All
INTERNATIONALS185389-82All
INTERNATIONALS1853FC89-87All
INTERNATIONALS185489-82All
INTERNATIONALS195489-84All
INTERNATIONALS195589-84All
INTERNATIONALS215589-84All

PART INFORMATION

Brand:Cardone Reman 18-4088 Disc Brake Caliper
Part Number:18-4088
Part Type: Disc Brake Caliper
Comment:Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.

PARTS ATTRIBUTES

NameValue
Brake Caliper FinishOil Emulsion
Caliper ColorGray
E-WasteNo
FAQsAs a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQsA symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQsA silicone grease is used on floating caliper mounting pins.
FAQsWhat type of grease is used on floating caliper mounting pins?
FAQsWhat type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAQsNot recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAQsNew hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.
FAQsInspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQsDo all of your Calipers come with the new hardware and a mounting bracket for installation?
FAQsCould calipers be the cause of a low brake pedal?
FAQsCar pulls to one side during braking. Why?
FAQsCan I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAQsBrakes squeal all of the time. What's causing the squeal?
FAQsBrake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
Features and BenefitsA plastic cap plug protects every brake port thread to ensure trouble-free installation.
Features and BenefitsRubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Features and BenefitsPistons are durable, resistant to cracking or pitting and handle great loads.
Features and BenefitsOur remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and BenefitsNew washers are included where applicable for a proper seal.
Features and BenefitsNew stainless steel hardware clips and new mounting pins are included where applicable.
Features and BenefitsNew bleeder screws provide trouble-free bleeding and a positive seal.
Features and BenefitsNew banjo bolts are included where applicable to ensure a perfect fit and quick installation.
Features and BenefitsMounting bracket is included where applicable for a hassle-free installation.
Features and BenefitsCalipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
Features and BenefitsAs a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Hazardous MaterialNo
Height - Each (Inch)5.25
Installation Hardware IncludedYes
Item Level GTIN00082617011235
Length - Each (Inch)9.563
Life Cycle StatusAvailable to Order
Life Cycle Status DescriptionAvailable to Order - Part is released to customers for ordering.
Mounting Bolts IncludedNo
Package ContentsCaliper; Hardware Kit
Pads IncludedNo
Piston MaterialSteel
Piston Quantity1
Piston Size (OD) (in)3.368
Piston Size (OD) (mm)85.5472
Product ConditionRemanufactured
Quantity Per Application1
Weight - Each (Gross Pounds)17.48
Width - Each (Inch)7.25
Buy Part Now
Top