Arnott Industries SK-3199 Shock Absorber For MERCEDES-BENZ

Buy Part Now

ShowMeTheParts has a wide selection of Arnott Industries products for a variety of years, makes, and models.

Arnott Industries SK-3199 Shock Absorber For MERCEDES-BENZ

BUYERS GUIDE

Make Model Year Engine
MERCEDES-BENZCLS55 AMG2006All
MERCEDES-BENZCLS63 AMG2007-11All
MERCEDES-BENZE55 AMG2003-06All
MERCEDES-BENZE63 AMG2007-09All

PART INFORMATION

Brand:Shock Absorber by Arnott Industries For MERCEDES-BENZ | ShowMeTheParts.com
Part Number:sk3199
Part Type: Shock Absorber
Comment:SK-3199 is an Arnott remanufactured O.E. rear shock absorber for the left or right side of the 2003-2009 Mercedes-Benz E-Class (W211) and 2005-2011 CLS-Class (W219) AMG. The shock is inspected, steam cleaned, and spin blasted to bare metal before it is recharged with new high-performance shock oil. Worn components, such as the piston and rod guides, as well as the seal pack, are replaced before being repainted with corrosion inhibiting paint. The shock and damping coil are dyno and functionally tested to assure OE performance. Arnott remanufactures and assembles this shock in the USA and backs it with a Limited Lifetime Warranty.

PARTS ATTRIBUTES

Name Value
AdjustableNo
Adjustable DampingYes
Air AdjustableNo
Air BladderNo
Air Bladder MaterialN/A
Air Ride SuspensionNo
Bearing Plate IncludedNo
Body End Measuring PointCenter Eye
Body/housing Diameter (Millimeter)62.7
Boot ColorBlack
Boot ColorShock Assembly
Boot/dust Shield IncludedYes
California Proposition 65No
Coil Over Springs IncludedNo
Coil Spring Maximum Outside Diameter (Millimeter)N/A
ColorN/A
Compressed Length (Millimeter)403.1
Connector Color403.1
ContentsBlack
ContentsShock Assembly
Dust Shield MaterialRubber
Extended Length (Millimeter)648.4
Factory ReplacementNo
Gas ChargedYes
Hardware IncludedYes
Hazardous MaterialNo
Heavy Duty Crimping RingsN/A
Height - Each (Inch)6.2500
Internal Construction TypeMonotube
Internal Damper TypeHydraulic
Item Level GTIN00815710017718
Length - Each (Inch)32.0000
Life Cycle Status DescriptionAvailable to Order - Part is released to customers for ordering.
Lower Mount TypeEyelet
Lower Mounting Isolator IncludedNo
MaterialRubber
Mounting Hardware IncludedNo
Progressive Spring RateN/A
Protective Aluminum CanNo
Quantity Per Application2
Remote Line Included648.4
Shock Absorber Rod End Measuring PointShoulder of Stud
Shock Spring AssistedNo
Shock/strut DesignMonotube
Spring Isolators IncludedNo
Spring Rate TypeN/A
Spring Seat IncludedNo
Springs IncludedNo
Travel Length (Millimeter)245.3
Universal Or Specific FitNo
Upper Mount TypeStud
Upper Mounting Isolator IncludedYes
Weight - Each (Gross Pounds)9.6000
Width - Each (Inch)6.5000
Wire QuantityYes
Wiring Harness LengthNo
Buy Part Now
Top