Arnott Industries AS-3250 Air Suspension Strut For JEEP

Buy Part Now

ShowMeTheParts has a wide selection of Arnott Industries products for a variety of years, makes, and models.

Arnott Industries AS-3250 Air Suspension Strut For JEEP


Make Model Year Engine


Brand:Air Suspension Strut by Arnott Industries For JEEP |
Part Number:as3250
Part Type: Air Suspension Strut
Comment:AS-3250 is a new, Arnott engineered, aftermarket air suspension strut for the front right-hand side of the 2016-21 Jeep Grand Cherokee (WK2 Chassis) w/Quadra-Lift and without Sport Suspension. This new assembly features a premium Eibach monotube shock absorber and custom air spring, designed to improve ride comfort and handling. The Arnott strut is built with Tier 1 components including a cross-hatch, multi-ply ContiTech air sleeve protected by an aluminum can and dust cover. This new air strut is designed and assembled in the USA with a formed steel top mount, O-rings, polyurethane bump stop, heavy-duty crimping rings, new airline fitting and check valve.


Name Value
Air AdjustableYes
Air BladderYes
Air Bladder MaterialRubber
Air Ride SuspensionYes
Air Spring System Type594.6
Airflow Rate (Cubic Feet per Minute)Yes
Bearing Plate IncludedYes
Body End Measuring PointCenter Eye
Boot ColorBlack
Boot/dust Shield IncludedYes
California Proposition 65N/A
Coil Over Springs IncludedN/A
Compressed Length (Millimeter)458.8
Compressor Amperage (Ampere)458.8
Connector GenderYes
ContentsAir Shock Assembly
Country of OriginUnited States
Dust Shield MaterialN/A
Extended Length (Millimeter)594.6
Grade TypeStandard
Grade TypeNo
Hazardous MaterialNo
Heavy Duty Crimping RingsYes
Height - Each (Inch)8.5000
Height - Each (cm)21.5900
Inlet Port Diameter (Millimeter)Black
Internal Construction TypeMonotube
Internal Damper TypeHydraulic
Item Level GTIN00815710018197
Length - Each (Inch)38.5000
Length - Each (cm)97.7900
Lower Mount TypeClevis
Lower Mounting Isolator IncludedNo
Maximum Pressure (Pounds per Square Inch)135.7884
Mounting Bracket IncludedRubber
Mounting Hardware IncludedYes
Progressive Spring RateProgressive
Protective Aluminum CanNo
Quantity Per Application1
Shock Absorber Rod End Measuring PointShoulder of Stud
Shock Spring AssistedYes
Shock/strut DesignMonotube
Spring Isolators IncludedYes
Spring Rate TypeProgressive
Spring Seat IncludedNo
Springs IncludedYes
Terminal GenderNo
Travel Length (Millimeter)135.7884
Upper Mount TypeStud
Upper Mounting Isolator IncludedYes
Weight - Each (Gross Pounds)51.9200
Weight - Each (Gross Pounds)23.6000
Width - Each (Inch)10.0000
Width - Each (cm)25.4000
Buy Part Now