Arnott Industries AS-2961 Air Suspension Strut For LAND ROVER

Buy Part Now

ShowMeTheParts has a wide selection of Arnott Industries products for a variety of years, makes, and models.

Arnott Industries AS-2961 Air Suspension Strut For LAND ROVER


Make Model Year Engine


Brand:Air Suspension Strut by Arnott Industries For LAND ROVER |
Part Number:as2961
Part Type: Air Suspension Strut
Comment:The Arnott designed new front strut for the 2003-2012 L322, MK-III, Vogue Range Rove, part AS-2961 (RF) and AS-2962 (LF), is new and not remanufactured. Arnott's exclusive design features a new custom-made and tuned shock absorber valved for a smooth yet responsive ride. These new struts are assembled in the USA with a multi-ply air spring bladder manufactured by Vibracoustic. The strut assembly also features extra-heavy duty crimping rings, new seals, air fitting and check valve along with a stamped steel top.


Name Value
Adjustable DampingNo
Air AdjustableYes
Air BladderYes
Air Bladder MaterialRubber
Air Ride SuspensionYes
Air Spring System Type650
Airflow Rate (Cubic Feet per Minute)Yes
Bearing Plate IncludedYes
Body End Measuring PointCenter Eye
Boot ColorBlack
Boot/dust Shield IncludedYes
California Proposition 65N/A
Coil Over Springs IncludedN/A
Compressed Length (Millimeter)480
Compressor Amperage (Ampere)480
Connector GenderYes
ContentsAir Shock Assembly; Mounting Hardware
Country of OriginUnited States
Dust Shield MaterialN/A
Extended Length (Millimeter)650
Gas ChargedYes
Grade TypeStandard
Grade TypeNo
Hazardous MaterialNo
Heavy Duty Crimping RingsYes
Height - Each (Inch)8.5000
Height - Each (cm)21.5900
Inlet Port Diameter (Millimeter)Black
Internal Construction TypeTwin-tube
Internal Damper TypeHydraulic
Item Level GTIN00815710015356
Length - Each (Inch)32.5000
Length - Each (cm)82.5500
Lower Mount TypeBracket
Lower Mounting Isolator IncludedNo
Maximum Pressure (Pounds per Square Inch)170.00219999999999
Mounting Bracket IncludedRubber
Mounting Hardware IncludedYes
Progressive Spring RateProgressive
Protective Aluminum CanNo
Quantity Per Application1
Shock Absorber Rod End Measuring PointShoulder of Stud
Shock Spring AssistedYes
Shock/strut DesignTwin-tube
Spring Isolators IncludedYes
Spring Rate TypeProgressive
Spring Seat IncludedNo
Springs IncludedYes
Terminal GenderNo
Travel Length (Millimeter)170.00219999999999
Upper Mount TypeStud
Upper Mounting Isolator IncludedYes
Weight - Each (Gross Pounds)69.5200
Weight - Each (Gross Pounds)31.6000
Width - Each (Inch)9.2500
Width - Each (cm)23.4950
Buy Part Now