ShowMeTheParts has a wide selection of American Grease Stick (AGS) products for a variety of years, makes, and models.
BUYERS GUIDE
| Make | Model | Year | Engine |
|---|
Brand:American Grease Stick (AGS) PAX-608 Brake Hydraulic Line
Part Number:PAX-608
Part Type: Brake Hydraulic Line
Comment:AGS is the industry leader in the automotive aftermarket for steel brake, fuel, and transmission lines. Combining only the highest quality components, AGS manufactures steel lines that lead the automotive aftermarket in quality, coverage, and fill-rate. Poly-Armour has become the new standard in brake line replacement over the last several years. Surpassing all competitors as THE choice for both professionals and do-it-yourselfers when it comes to brake, fuel, and transmission line repair, Poly-Armour is different from anything else on the market due to its PVF or Poly-Vinyl Fluorine coat. This coating is actually a highly durable 'plastic' coating that is 'baked and cured' to the line. This provides extra protection from corrosion, debris, and road surfacing solutions. It also offers superior bend-ability without kinking. That makes Poly-Armour the easiest line to work with - period. Underneath the PVF-coating is a double-wall, low carbon steel, copper brazed tubing which meets all international and U.S. requirements for brake tubing. The difference being that Poly-Armour offers 30 times the corrosion resistance of galvanized steel alone. PVF-coated lines are now the standard in many vehicles on the road today including: Volkswagen/Audi, Honda, Toyota, and Mercedes. Considered a premium line, Poly-Armour should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel, etc. When extending the life of the lines is important, Poly-Armour should be used; such as on commercial vehicles or when exact OEM replacement is required or desired. - Poly-Armour is 30x More Resistant to Corrosion - DOT Approved for Hydraulic Brake Systems - Bends Easier than Standard Steel Tubing - Available in Coils of 25ft and 50ft - Finished Lines Available for Domestic and Import. Poly-Armour lines and tubing meet the following specifications: SAEJ527b, GM123M, SAEJ1290, DIN 74234
PARTS ATTRIBUTES
| Name | Value |
|---|---|
| Bending Method | Tubing Bender Suggested |
| California Prop 65 | 5/8 - 18 |
| California Proposition 65 | WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| End 1 Gender | Tubing Bender Suggested |
| Finish | Natural |
| Fitting Type End 1 | No |
| Fitting Type End 1 | Inverted |
| Fitting Type End 2 | 50 |
| Fitting Type End 2 | Inverted |
| Fittings Included | Yes |
| Flare Type | 5/8 - 18 |
| Hazardous Material | No |
| Hazardous Material | Inverted |
| Height - Case (Inch) | 5.0000 |
| Height - Each (Inch) | 0.7010 |
| Item Level GTIN | 00077146370243 |
| Length | 8 Inches |
| Length - Case (Inch) | 8.0000 |
| Length - Each (Inch) | 8.0000 |
| Life Cycle Status Description | Available to Order - Part is released to customers for ordering. |
| Material | PVF (Coated Steel) |
| Quantity Per Application | 1 |
| Shelf Qty | WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Thread Size End 1 (in) | 5/8 - 18 |
| Thread Size End 1 (mm) | Brake Line |
| Thread Size End 1 (mm) | 5/8 - 18 |
| Thread Size End 2 (in) | 5/8 - 18 |
| Thread Size End 2 (mm) | 5/8 - 18 |
| Tube Outside Diameter (in) | 0.375 Inch |
| Tube Outside Diameter (mm) | 10 mm |
| Weight - Case (Gross Pounds) | 6.7000 |
| Weight - Each (Gross Pounds) | 0.1340 |
| Width - Case (Inch) | 5.0000 |
| Width - Each (Inch) | 0.7010 |