ShowMeTheParts has a wide selection of American Grease Stick (AGS) products for a variety of years, makes, and models.
BUYERS GUIDE
| Make | Model | Year | Engine |
|---|
Brand:American Grease Stick (AGS) PAAX-B312 Brake Hydraulic Line Adapter
Part Number:PAAX-B312
Part Type: Brake Hydraulic Line Adapter
Comment:Adapts metric bubble flare to a standard 3/16in Domestic brake system. AGS 8in adapter brake lines allow dissimilar connections to be made within the same system. Adapter lines are available in common brake line tube sizes. Poly-Armour has become the new standard in brake line replacement over the last several years. Surpassing all competitors as THE choice for both professionals and do-it-yourselfers when it comes to brake, fuel, and transmission line repair, Poly-Armour is different from anything else on the market due to its PVF or Poly-Vinyl Fluorine coat. This coating is actually a highly durable 'plastic' coating that is 'baked and cured' to the line. This provides extra protection from corrosion, debris, and road surfacing solutions. It also offers superior bend-ability without kinking. That makes Poly-Armour the easiest line to work with - period. Underneath the PVF-coating is a double-wall, low carbon steel, copper brazed tubing which meets all international and U.S. requirements for brake tubing. The difference being that Poly-Armour offers 30 times the corrosion resistance of galvanized steel alone. PVF-coated lines are now the standard in many vehicles on the road today including: Volkswagen/Audi, Honda, Toyota, and Mercedes. Considered a premium line, Poly-Armour should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel, etc. When extending the life of the lines is important, Poly-Armour should be used; such as on commercial vehicles or when exact OEM replacement is required or desired. - Poly-Armour is 30x More Resistant to Corrosion - DOT Approved for Hydraulic Brake Systems - Bends Easier than Standard Steel Tubing - Available in Coils of 25ft and 50ft - Finished Lines Available for Domestic and Import. Poly-Armour lines and tubing meet the following specifications: SAEJ527b, GM123M, SAEJ1290, DIN 74234
PARTS ATTRIBUTES
| Name | Value |
|---|---|
| Bending Method | Tubing Bender Not Required |
| California Prop 65 | M12 x 1 |
| California Proposition 65 | WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| End 1 Gender | Tubing Bender Not Required |
| Finish | Natural |
| Fitting Type End 1 | Inverted |
| Fitting Type End 1 | No |
| Fitting Type End 2 | Bubble |
| Fitting Type End 2 | 50 |
| Fittings Included | Yes |
| Flare Type | 3/8 - 24 |
| Hazardous Material | Inverted |
| Hazardous Material | No |
| Height - Case (Inch) | 4.2500 |
| Height - Each (Inch) | 0.6150 |
| Item Level GTIN | 00077146370847 |
| Length | 8 Inches |
| Length - Case (Inch) | 8.0000 |
| Length - Each (Inch) | 8.0000 |
| Life Cycle Status Description | Available to Order - Part is released to customers for ordering. |
| Material | PVF (Coated Steel) |
| Quantity Per Application | 1 |
| Shelf Qty | WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Thread Size End 1 (in) | 3/8 - 24 |
| Thread Size End 1 (mm) | Brake Line Adapter |
| Thread Size End 1 (mm) | 3/8 - 24 |
| Thread Size End 2 (in) | M12 x 1 |
| Thread Size End 2 (mm) | M12 x 1 |
| Tube Outside Diameter (in) | 0.188 Inch |
| Tube Outside Diameter (mm) | 5 mm |
| Weight - Case (Gross Pounds) | 3.5000 |
| Weight - Each (Gross Pounds) | 0.0700 |
| Width - Case (Inch) | 4.2500 |
| Width - Each (Inch) | 0.6150 |