ShowMeTheParts has a wide selection of American Grease Stick (AGS) products for a variety of years, makes, and models.
BUYERS GUIDE
Make | Model | Year | Engine |
---|
Brand:Brake Hydraulic Line Adapter by American Grease Stick (AGS) | ShowMeTheParts.com
Part Number:paao313
Part Type: Brake Hydraulic Line Adapter
Comment:Adapts metric bubble flare to a standard 3/16in Domestic brake system. AGS 8in adapter brake lines allow dissimilar connections to be made within the same system. Adapter lines are available in common brake line tube sizes. Poly-Armour has become the new standard in brake line replacement over the last several years. Surpassing all competitors as THE choice for both professionals and do-it-yourselfers when it comes to brake, fuel, and transmission line repair, Poly-Armour is different from anything else on the market due to its PVF or Poly-Vinyl Fluorine coat. This coating is actually a highly durable 'plastic' coating that is 'baked and cured' to the line. This provides extra protection from corrosion, debris, and road surfacing solutions. It also offers superior bend-ability without kinking. That makes Poly-Armour the easiest line to work with - period. Underneath the PVF-coating is a double-wall, low carbon steel, copper brazed tubing which meets all international and U.S. requirements for brake tubing. The difference being that Poly-Armour offers 30 times the corrosion resistance of galvanized steel alone. PVF-coated lines are now the standard in many vehicles on the road today including: Volkswagen/Audi, Honda, Toyota, and Mercedes. Considered a premium line, Poly-Armour should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel, etc. When extending the life of the lines is important, Poly-Armour should be used; such as on commercial vehicles or when exact OEM replacement is required or desired. - Poly-Armour is 30x More Resistant to Corrosion - DOT Approved for Hydraulic Brake Systems - Bends Easier than Standard Steel Tubing - Available in Coils of 25ft and 50ft - Finished Lines Available for Domestic and Import. Poly-Armour lines and tubing meet the following specifications: SAEJ527b, GM123M, SAEJ1290, DIN 74234
PARTS ATTRIBUTES
Name | Value |
---|---|
California Proposition 65 | WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Female To Female | Yes |
Finish | Zinc Dichromate |
Fitting Type End 1 | No |
Fitting Type End 2 | 5 |
Hazardous Material | No |
Height - Case (Inch) | 2.0000 |
Height - Each (Inch) | 0.6150 |
Item Level GTIN | 00077146370854 |
Length - Case (Inch) | 9.0000 |
Length - Each (Inch) | 8.0000 |
Life Cycle Status Description | Available to Order - Part is released to customers for ordering. |
Male To Female | No |
Male To Male | No |
Material | Steel |
Quantity Per Application | 1 |
Shelf Qty | WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Thread Pitch #1 | 24 Per Inch |
Thread Pitch #2 | 1.5 mm |
Thread Size #1 | 3/8 - 24 |
Thread Size #2 | M13 x 1.5 |
Thread Size End 1 (mm) | Brake Line Adapter |
Thread Type #1 | SAE |
Thread Type #2 | Metric |
Weight - Case (Gross Pounds) | 0.4620 |
Weight - Each (Gross Pounds) | 0.0730 |
Width - Case (Inch) | 2.0000 |
Width - Each (Inch) | 0.6150 |