American Grease Stick (AGS) PA-460 Brake Hydraulic Line

Buy Part Now

ShowMeTheParts has a wide selection of American Grease Stick (AGS) products for a variety of years, makes, and models.

American Grease Stick (AGS) PA-460 Brake Hydraulic Line


Make Model Year Engine


Brand:Brake Hydraulic Line by American Grease Stick (AGS) |
Part Number:pa460
Part Type: Brake Hydraulic Line
Comment:AGS is the industry leader in the automotive aftermarket for steel brake, fuel, and transmission lines. Combining only the highest quality components, AGS manufactures steel lines that lead the automotive aftermarket in quality, coverage, and fill-rate. Poly-Armour has become the new standard in brake line replacement over the last several years. Surpassing all competitors as THE choice for both professionals and do-it-yourselfers when it comes to brake, fuel, and transmission line repair, Poly-Armour is different from anything else on the market due to its PVF or Poly-Vinyl Fluorine coat. This coating is actually a highly durable 'plastic' coating that is 'baked and cured' to the line. This provides extra protection from corrosion, debris, and road surfacing solutions. It also offers superior bend-ability without kinking. That makes Poly-Armour the easiest line to work with - period. Underneath the PVF-coating is a double-wall, low carbon steel, copper brazed tubing which meets all international and U.S. requirements for brake tubing. The difference being that Poly-Armour offers 30 times the corrosion resistance of galvanized steel alone. PVF-coated lines are now the standard in many vehicles on the road today including: Volkswagen/Audi, Honda, Toyota, and Mercedes. Considered a premium line, Poly-Armour should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel, etc. When extending the life of the lines is important, Poly-Armour should be used; such as on commercial vehicles or when exact OEM replacement is required or desired. - Poly-Armour is 30x More Resistant to Corrosion - DOT Approved for Hydraulic Brake Systems - Bends Easier than Standard Steel Tubing - Available in Coils of 25ft and 50ft - Finished Lines Available for Domestic and Import. Poly-Armour lines and tubing meet the following specifications: SAEJ527b, GM123M, SAEJ1290, DIN 74234


Name Value
Bend Angle (deg)7/16 - 24
California Proposition 65WARNING Cancer and Reproductive Harm -
Collet Size (in)No
Country of OriginUnited States
End 1 Flare TypeInverted
End 1 Thread Diameter (Inch)7/16 - 24
End 2 Flare TypeInverted
End 2 Thread Diameter (Inch)7/16 - 24
End 2 Thread Size7/16 - 24
End 3 Thread Size60
Fitting FinishZinc Dichromate
Fitting TypeTube Nut
Fitting Type End 1No
Fitting Type End 210
Hazardous MaterialNo
Height - Case (Inch)2.0000
Height - Each (Inch)0.4880
Inside Diameter (Inch)1/4
Item Level GTIN00077146370144
Leg Length (Foot)1/4
Length - Case (Inch)61.5000
Length - Each (Inch)60.0000
Line Length (Inch)60
Line MaterialSteel
Maximum Working Pressure (Pounds per Square Inch)No
Outer SpringNo
Outer Wear GuardNo
Plug Type1/4
Polyvinyl Fluoride CoatedYes
Quantity Per Application1
Shelf QtyWARNING Cancer and Reproductive Harm -
Thread Size End 1 (mm)Brake Line
Weight - Case (Gross Pounds)4.0410
Weight - Each (Gross Pounds)0.3510
Width - Case (Inch)2.0000
Width - Each (Inch)0.4880
Buy Part Now