ShowMeTheParts has a wide selection of American Grease Stick (AGS) products for a variety of years, makes, and models.
BUYERS GUIDE
| Make | Model | Year | Engine |
|---|
Brand:American Grease Stick (AGS) CNJ-340 Brake Hydraulic Line
Part Number:CNJ-340
Part Type: Brake Hydraulic Line
Comment:NiCopp is considered the super-premium alternative for brake lines and should be considered where harsh environments are a factor, where the longest life-span for lines is required, and/or where direct OEM replacement is desired. – NiCopp Does Not Rust or Corrode – DOT Approved for Hydraulic Brake Systems – Bends 58% Easier than Steel Tubing \n- AGS NiCopp is a nickel-copper alloy brake tubing that meets SAE Standard J1047 and ISO 4038; meeting all international and U.S. requirements for brake tubing. -\n- This alloy is approximately 9.2% nickel, 1.4% iron, 0.8% manganese, and 88.6% copper. Under the UNS system, this alloy is designated as UNS C70600. NiCopp is not only much more corrosion resistant than steel, but easier to bend and form and has the strength and structural integrity of steel lines.\n-
PARTS ATTRIBUTES
| Name | Value |
|---|---|
| Bending Method | Tubing Bender Not Required |
| California Prop 65 | M10 x 1 |
| California Proposition 65 | WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| End 1 Gender | Tubing Bender Not Required |
| Finish | Black Anodized |
| Fitting Type End 1 | No |
| Fitting Type End 1 | Inverted |
| Fitting Type End 2 | 5 |
| Fitting Type End 2 | Inverted |
| Fittings Included | Yes |
| Flare Type | M10 x 1 |
| Hazardous Material | No |
| Hazardous Material | Inverted |
| Height - Case (Inch) | 2.0000 |
| Height - Each (Inch) | 0.4330 |
| Item Level GTIN | 00077146380815 |
| Length | 40 Inches |
| Length - Case (Inch) | 41.2500 |
| Length - Each (Inch) | 40.0000 |
| Life Cycle Status Description | Available to Order - Part is released to customers for ordering. |
| Material | Nickel - Copper |
| Quantity Per Application | 1 |
| Shelf Qty | WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Thread Size End 1 (in) | M10 x 1 |
| Thread Size End 1 (mm) | Brake Line |
| Thread Size End 1 (mm) | M10 x 1 |
| Thread Size End 2 (in) | M10 x 1 |
| Thread Size End 2 (mm) | M10 x 1 |
| Tube Outside Diameter (in) | 0.188 Inch |
| Tube Outside Diameter (mm) | 5 mm |
| Weight - Case (Gross Pounds) | 1.3810 |
| Weight - Each (Gross Pounds) | 0.2010 |
| Width - Case (Inch) | 2.0000 |
| Width - Each (Inch) | 0.4330 |