American Grease Stick (AGS) CNC-316-12 Brake Hydraulic Line

Buy Part Now

ShowMeTheParts has a wide selection of American Grease Stick (AGS) products for a variety of years, makes, and models.

American Grease Stick (AGS) CNC-316-12 Brake Hydraulic Line

BUYERS GUIDE

Make Model Year Engine

PART INFORMATION

Brand:American Grease Stick (AGS) CNC-316-12 Brake Hydraulic Line
Part Number:CNC-316-12
Part Type: Brake Hydraulic Line
Comment:3/16 in x 12ft Nickel/Copper/Iron Alloy Tubing - Use to fabricate 3/16 in; Domestic, European, Japanese, British, and adapter brake lines. When combined with tube nuts and flaring tool, coils are an economical solution for shops that want to build their own lines, custom lengths or non-standard applications. NiCopp is a nickel-copper alloy brake tubing that meets SAE Standard J1047 and ISO 4038; meeting all international and U.S. requirements for brake tubing. This alloy is approximately 9.2 Percent nickel, 1.4 Percent iron, 0.8 Percent manganese, and 88.6 Percent copper. Under the UNS system, this alloy is designated as UNS C70600. NiCopp therefore has the strength and structural integrity of steel lines but with the added benefit of being much more corrosion resistant. NiCopp is also easier to bend and form than steel tubing. Nickel-copper, commonly referred to as 90-10 copper, has been used on several European vehicle brake systems since the 1970's, including: Volvo, Audi, Porsche, and Aston Martin. NiCopp has been used on hydraulic/fluid transfer systems on vehicles where steel lines and tubing are commonly used. This includes brake, fuel and transmission systems. NiCopp is considered the super-premium brand in brake lines and should be considered where the underbody of the vehicle is subjected to the harshest environments, where the longest life-span for lines is required, and/or where direct OEM replacement is desired. - NiCopp Does Not Rust or Corrode - DOT Approved for Hydraulic Brake Systems - Bends 58 Percent Easier than Steel Tubing 

PARTS ATTRIBUTES

Name Value
Abrasion ResistantYes
Bending MethodBending Tool not required
Bending Tools RequiredNo
California Prop 65WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
End 1 GenderBending Tool not required
Fitting Type End 1No
Fitting Type End 220
Hazardous MaterialNo
Height - Case (Inch)5.0000
Height - Each (Inch)0.2500
Item Level GTIN00077146703307
Length1 in
Length - Case (Inch)13.5000
Length - Each (Inch)12.0000
Life Cycle Status DescriptionAvailable to Order - Part is released to customers for ordering.
Line Diameter3/16 in
Line MaterialRubber
LockableYes
Meets Or Exceeds Oe Manufacture SpecsYes
Mounting Hardware IncludedNo
Polyvinyl Fluoride CoatedNo
Pre-formedNo
Quantity Per Application1
Thread Size End 1 (mm)Brake Line Coil 12
Thread Size End 2 (in)WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Weight - Case (Gross Pounds)24.9000
Weight - Each (Gross Pounds)0.5970
Width - Case (Inch)13.5000
Width - Each (Inch)12.0000
Buy Part Now
Top