American Grease Stick (AGS) CN-612 Brake Hydraulic Line

Buy Part Now

ShowMeTheParts has a wide selection of American Grease Stick (AGS) products for a variety of years, makes, and models.

American Grease Stick (AGS) CN-612 Brake Hydraulic Line

BUYERS GUIDE

Make Model Year Engine

PART INFORMATION

Brand:Brake Hydraulic Line by American Grease Stick (AGS) | ShowMeTheParts.com
Part Number:cn612
Part Type: Brake Hydraulic Line
Comment:NiCopp is considered the super-premium alternative for brake lines and should be considered where harsh environments are a factor, where the longest life-span for lines is required, and/or where direct OEM replacement is desired. � NiCopp Does Not Rust or Corrode � DOT Approved for Hydraulic Brake Systems � Bends 58% Easier than Steel Tubing and is available in 25, 50, and 100 ft lengths � Finished Lines Available for Domestic and Import.- AGS NiCopp is a nickel-copper alloy brake tubing that meets SAE Standard J1047 and ISO 4038; meeting all international and U.S. requirements for brake tubing. -\n- This alloy is approximately 9.2% nickel, 1.4% iron, 0.8% manganese, and 88.6% copper. Under the UNS system, this alloy is designated as UNS C70600. NiCopp is not only much more corrosion resistant than steel, but easier to bend and form and has the strength and structural integrity of steel lines.\n-

PARTS ATTRIBUTES

Name Value
Bending MethodTubing Bender Suggested
California Prop 655/8 - 18
California Proposition 65WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
End 1 GenderTubing Bender Suggested
FinishBlack Anodized
Fitting Type End 1No
Fitting Type End 1Inverted
Fitting Type End 24
Fitting Type End 2Inverted
Fittings IncludedYes
Flare Type5/8 - 18
Hazardous MaterialNo
Hazardous MaterialInverted
Height - Case (Inch)2.0000
Height - Each (Inch)0.7010
Item Level GTIN00077146380709
Length12 Inches
Length1 Foot
Length - Case (Inch)13.5000
Length - Each (Inch)12.0000
Life Cycle Status DescriptionAvailable to Order - Part is released to customers for ordering.
MaterialNickel - Copper
Quantity Per Application1
Shelf QtyWARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Thread Size End 1 (in)5/8 - 18
Thread Size End 1 (mm)Brake Line
Thread Size End 1 (mm)5/8 - 18
Thread Size End 2 (in)5/8 - 18
Thread Size End 2 (mm)1/2 - 20
Tube Outside Diameter (in)0.375 Inch
Tube Outside Diameter (mm)10 mm
Weight - Case (Gross Pounds)0.8110
Weight - Each (Gross Pounds)0.1710
Width - Case (Inch)2.0000
Width - Each (Inch)0.7010
Buy Part Now
Top