American Grease Stick (AGS) CN-512 Brake Hydraulic Line

Buy Part Now

ShowMeTheParts has a wide selection of American Grease Stick (AGS) products for a variety of years, makes, and models.

American Grease Stick (AGS) CN-512 Brake Hydraulic Line

BUYERS GUIDE

Make Model Year Engine

PART INFORMATION

Brand:Brake Hydraulic Line by American Grease Stick (AGS) | ShowMeTheParts.com
Part Number:cn512
Part Type: Brake Hydraulic Line
Comment:NiCopp is considered the super-premium alternative for brake lines and should be considered where harsh environments are a factor, where the longest life-span for lines is required, and/or where direct OEM replacement is desired. � NiCopp Does Not Rust or Corrode � DOT Approved for Hydraulic Brake Systems � Bends 58% Easier than Steel Tubing and is available in 25, 50, and 100 ft lengths � Finished Lines Available for Domestic and Import.- AGS NiCopp is a nickel-copper alloy brake tubing that meets SAE Standard J1047 and ISO 4038; meeting all international and U.S. requirements for brake tubing. -\n- This alloy is approximately 9.2% nickel, 1.4% iron, 0.8% manganese, and 88.6% copper. Under the UNS system, this alloy is designated as UNS C70600. NiCopp is not only much more corrosion resistant than steel, but easier to bend and form and has the strength and structural integrity of steel lines.\n-

PARTS ATTRIBUTES

Name Value
Bend Angle (deg)1/2 - 20
BendableYes
Bending MethodTubing Bender Suggested
California Proposition 65WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Collet Size (in)No
End 1 Flare TypeInverted
End 1 GenderTubing Bender Suggested
End 1 Thread Diameter (Inch)1/2 - 20
End 2 Flare TypeInverted
End 2 Thread Diameter (Inch)1/2 - 20
End 2 Thread Size1/2 - 20
End 3 Thread Size12
Fitting FinishBlack Anodized
Fitting TypeMale
Fitting Type End 1No
Fitting Type End 25
Fittings IncludedYes
Hazardous MaterialNo
Height - Case (Inch)2.0000
Height - Each (Inch)0.5550
Inside Diameter (Inch)5/16
Item Level GTIN00077146380624
Length - Case (Inch)13.5000
Length - Each (Inch)12.0000
Life Cycle Status DescriptionAvailable to Order - Part is released to customers for ordering.
Line Length (Inch)12
Line MaterialNickel - Copper
Plug Type5/16
Pre-FormedNo
Quantity Per Application1
Shelf QtyWARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Thread Size End 1 (mm)Brake Line
Weight - Case (Gross Pounds)0.7460
Weight - Each (Gross Pounds)0.1230
Width - Case (Inch)2.0000
Width - Each (Inch)0.5550
Buy Part Now
Top