American Grease Stick (AGS) CF-5 Compression Fitting

Buy Part Now

ShowMeTheParts has a wide selection of American Grease Stick (AGS) products for a variety of years, makes, and models.

American Grease Stick (AGS) CF-5 Compression Fitting

BUYERS GUIDE

Make Model Year Engine

PART INFORMATION

Brand:Compression Fitting by American Grease Stick (AGS) | ShowMeTheParts.com
Part Number:cf5
Part Type: Compression Fitting
Comment:Compression unions are used in low pressure application such as: air, oil, and water. They are generally used to connect lengths of copper, brass, and aluminum tubing. To make connection, place the nut and then the sleeve over the tubing and then insert tube into the fitting body. When tight, the wedging action of sleeve between body and nut create a leak free connection. Use for joining 1/2in copper, brass, or aluminum tubing in low-pressure applications (NOT brake lines).

PARTS ATTRIBUTES

Name Value
California Proposition 65WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Compression Sleeve Inside Diameter1/2 Inch
End 1 TypeRing
End 2 TypeRing
FinishBrass
Fitting Type End 1No
Fitting Type End 210
Hazardous MaterialNo
Height - Case (Inch)2.0000
Height - Each (Inch)5.5000
Item Level GTIN00077146280153
Length - Case (Inch)6.0000
Length - Each (Inch)1.0000
Life Cycle Status DescriptionAvailable to Order - Part is released to customers for ordering.
Line LengthYes
MaterialBrass
Quantity Per Application1
Sae ApprovedYes
Shelf QtyWARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Thread Size End 1 (mm)Compression Fitting
Thread Type #1SAE
Weight - Case (Gross Pounds)1.7710
Weight - Each (Gross Pounds)0.1670
Width - Case (Inch)6.0000
Width - Each (Inch)1.8750
Buy Part Now
Top