American Grease Stick (AGS) BL-530 Brake Hydraulic Line

Buy Part Now

ShowMeTheParts has a wide selection of American Grease Stick (AGS) products for a variety of years, makes, and models.

American Grease Stick (AGS) BL-530 Brake Hydraulic Line

BUYERS GUIDE

Make Model Year Engine

PART INFORMATION

Brand:Brake Hydraulic Line by American Grease Stick (AGS) | ShowMeTheParts.com
Part Number:bl530
Part Type: Brake Hydraulic Line
Comment:AGS is the industry leader in the automotive aftermarket for steel brake, fuel, and transmission lines. Combining only the highest quality components, AGS manufactures steel lines that lead the automotive aftermarket in quality, coverage, and fill-rate. The entry-level replacement line in the AGS brake line category is still an excellent choice for aftermarket fluid transfer line repair and replacement. The steel lines and tubing are constructed with safety and longevity in mind. The tubing is produced by wrapping copper-coated steel around itself twice to form the tubing. This double-wall tube is what provides the strength and structural integrity to withstand the extreme pressures required, yet still remain pliable enough to be formed and bent to the shapes required to be routed beneath the vehicle. The finished tube is fused and zinc-coated to provide excellent rust and corrosion resistance as well. The AGS Standard Steel line has been the choice of professional installers/mechanics and do-it-yourself mechanics for many years. When properly installed, the standard steel line can provide a long-lasting repair or replacement for many types of vehicles and for all types of fluid transfer systems, including braking systems. However, when a vehicle is expected to see harsh environments like snow, road treatments, salt air, etc...on a regular basis or when the longest replacement life is required; other AGS premium lines like Poly-Armour and NiCopp should be considered. - Excellent Resistance to Rust and Corrosion - DOT Approved for Hydraulic Brake Systems - Bends and Forms without Kinking - Available in Coils of 25ft - Finished Lines Available for Domestic and Import. Standard Steel lines and tubing meet the following specifications: SAEJ527b, GM123M, SAEJ1290, DIN 74234

PARTS ATTRIBUTES

Name Value
Bend Angle (deg)1/2 - 20 Inch
BendableYes
California Proposition 65WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Collet Size (in)No
End 1 Flare TypeInverted
End 1 Thread Diameter (Inch)1/2 - 20
End 2 Flare TypeInverted
End 2 Thread Diameter (Inch)1/2 - 20 Inch
End 2 Thread Size1/2 - 20
End 3 Thread Size30 Inches
Fitting FinishZinc Dichromate
Fitting TypeTube Nut
Fitting Type End 1No
Fitting Type End 25
Hazardous MaterialNo
Height - Case (Inch)2.0000
Height - Each (Inch)0.5550
Inside Diameter (Inch)5/16 Inch
Item Level GTIN00077146359170
Length - Case (Inch)31.5000
Length - Each (Inch)30.0000
Life Cycle Status DescriptionAvailable to Order - Part is released to customers for ordering.
Line Length (Inch)30 Inches
Line MaterialSteel
Outer SpringNo
Outer Wear GuardNo
Plug Type5/16 Inch
Polyvinyl Fluoride CoatedNo
Pre-FormedNo
Quantity Per Application1
Shelf QtyWARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Thread Size End 1 (mm)Brake Line
Weight - Case (Gross Pounds)1.4410
Weight - Each (Gross Pounds)0.2280
Width - Case (Inch)2.0000
Width - Each (Inch)0.5550
Buy Part Now
Top