ShowMeTheParts has a wide selection of American Grease Stick (AGS) products for a variety of years, makes, and models.
BUYERS GUIDE
Make | Model | Year | Engine |
---|
Brand:Brake Hydraulic Line by American Grease Stick (AGS) | ShowMeTheParts.com
Part Number:bl408
Part Type: Brake Hydraulic Line
Comment:AGS is the industry leader in the automotive aftermarket for steel brake, fuel, and transmission lines. Combining only the highest quality components, AGS manufactures steel lines that lead the automotive aftermarket in quality, coverage, and fill-rate. The entry-level replacement line in the AGS brake line category is still an excellent choice for aftermarket fluid transfer line repair and replacement. The steel lines and tubing are constructed with safety and longevity in mind. The tubing is produced by wrapping copper-coated steel around itself twice to form the tubing. This double-wall tube is what provides the strength and structural integrity to withstand the extreme pressures required, yet still remain pliable enough to be formed and bent to the shapes required to be routed beneath the vehicle. The finished tube is fused and zinc-coated to provide excellent rust and corrosion resistance as well. The AGS Standard Steel line has been the choice of professional installers/mechanics and do-it-yourself mechanics for many years. When properly installed, the standard steel line can provide a long-lasting repair or replacement for many types of vehicles and for all types of fluid transfer systems, including braking systems. However, when a vehicle is expected to see harsh environments like snow, road treatments, salt air, etc...on a regular basis or when the longest replacement life is required; other AGS premium lines like Poly-Armour and NiCopp should be considered. - Excellent Resistance to Rust and Corrosion - DOT Approved for Hydraulic Brake Systems - Bends and Forms without Kinking - Available in Coils of 25ft - Finished Lines Available for Domestic and Import. Standard Steel lines and tubing meet the following specifications: SAEJ527b, GM123M, SAEJ1290, DIN 74234
PARTS ATTRIBUTES
Name | Value |
---|---|
Bend Angle (deg) | 7/16 - 24 Inch |
Bendable | Yes |
California Proposition 65 | WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Collet Size (in) | No |
End 1 Flare Type | Inverted |
End 1 Thread Diameter (Inch) | 7/16 - 24 |
End 2 Flare Type | Inverted |
End 2 Thread Diameter (Inch) | 7/16 - 24 Inch |
End 2 Thread Size | 7/16 - 24 |
End 3 Thread Size | 8 Inches |
Fitting Finish | Zinc Dichromate |
Fitting Type | Tube Nut |
Fitting Type End 1 | No |
Fitting Type End 2 | 10 |
Hazardous Material | No |
Height - Case (Inch) | 2.0000 |
Height - Each (Inch) | 0.4880 |
Inside Diameter (Inch) | 1/4 Inch |
Item Level GTIN | 00077146359071 |
Length - Case (Inch) | 9.0000 |
Length - Each (Inch) | 8.0000 |
Life Cycle Status Description | Available to Order - Part is released to customers for ordering. |
Line Length (Inch) | 8 Inches |
Line Material | Steel |
Outer Spring | No |
Outer Wear Guard | No |
Plug Type | 1/4 Inch |
Polyvinyl Fluoride Coated | No |
Pre-Formed | No |
Quantity Per Application | 1 |
Shelf Qty | WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Thread Size End 1 (mm) | Brake Line |
Weight - Case (Gross Pounds) | 0.8690 |
Weight - Each (Gross Pounds) | 0.0750 |
Width - Case (Inch) | 2.0000 |
Width - Each (Inch) | 0.4880 |